Set-Rite Products http://set-rite.com Set it Once, Set it Right...with Set-Rite Mon, 13 May 2013 16:46:47 +0000 en-US hourly 1 http://wordpress.org/?v=3.5.1 You Are Finished http://set-rite.com/you-are-finished/?utm_source=rss&utm_medium=rss&utm_campaign=you-are-finished http://set-rite.com/you-are-finished/#comments Tue, 12 Feb 2013 00:34:51 +0000 Tom Elliott http://set-rite.com/?p=6530  
Here is your finished extender flange and spacers giving you a Water & Gas-Tight seal. All that is left to do is set your toilet using a standard wax ring.
 
 
 
 

The post You Are Finished appeared first on Set-Rite Products.

]]>  

Here is your finished extender flange and spacers giving you a Water & Gas-Tight seal. All that is left to do is set your toilet using a standard wax ring.

 

 

 

 

The post You Are Finished appeared first on Set-Rite Products.

]]> http://set-rite.com/you-are-finished/feed/ 0 Choose Your Spacers http://set-rite.com/choose-your-spacers/?utm_source=rss&utm_medium=rss&utm_campaign=choose-your-spacers http://set-rite.com/choose-your-spacers/#comments Tue, 12 Feb 2013 00:28:41 +0000 Tom Elliott http://set-rite.com/?p=6529

The post Choose Your Spacers appeared first on Set-Rite Products.

]]> The post Choose Your Spacers appeared first on Set-Rite Products.

]]> http://set-rite.com/choose-your-spacers/feed/ 0 Install Set-Rite Gasket http://set-rite.com/install-set-rite-gasket/?utm_source=rss&utm_medium=rss&utm_campaign=install-set-rite-gasket http://set-rite.com/install-set-rite-gasket/#comments Tue, 12 Feb 2013 00:28:12 +0000 Tom Elliott http://set-rite.com/?p=6528 Your toilet flange is too low? Easy fix

The post Install Set-Rite Gasket appeared first on Set-Rite Products.

]]> Flange Too LowYour toilet flange is too low? Easy fix

The post Install Set-Rite Gasket appeared first on Set-Rite Products.

]]> http://set-rite.com/install-set-rite-gasket/feed/ 0 Flange Too Low http://set-rite.com/flange-too-low/?utm_source=rss&utm_medium=rss&utm_campaign=flange-too-low http://set-rite.com/flange-too-low/#comments Tue, 12 Feb 2013 00:27:41 +0000 Tom Elliott http://set-rite.com/?p=6527

The post Flange Too Low appeared first on Set-Rite Products.

]]> The post Flange Too Low appeared first on Set-Rite Products.

]]> http://set-rite.com/flange-too-low/feed/ 0 How To Video http://set-rite.com/how-to-video/?utm_source=rss&utm_medium=rss&utm_campaign=how-to-video http://set-rite.com/how-to-video/#comments Mon, 11 Feb 2013 18:17:30 +0000 Tom Elliott http://set-rite.com/?p=6505 Want to know how to fix your toilet flange? Is it too low, leaking or broken? It’s pretty easy…we’ll show you how…

The post How To Video appeared first on Set-Rite Products.

]]> Hank the PlumberWant to know how to fix your toilet flange? Is it too low, leaking or broken? It’s pretty easy…we’ll show you how…

The post How To Video appeared first on Set-Rite Products.

]]> http://set-rite.com/how-to-video/feed/ 0 You Are Done!! http://set-rite.com/you-are-done/?utm_source=rss&utm_medium=rss&utm_campaign=you-are-done http://set-rite.com/you-are-done/#comments Sun, 25 Mar 2012 17:23:02 +0000 Tom Elliott http://set-rite.com/?p=5346 So there you have it…now either you or your contractor can finish the flooring installation. The last thing you’ll need to do is to set your toilet with only ‘one’ standard wax ring and not one with a rubber cone!!

The post You Are Done!! appeared first on Set-Rite Products.

]]> So there you have it…now either you or your contractor can finish the flooring installation. The last thing you’ll need to do is to set your toilet with only ‘one’ standard wax ring and not one with a rubber cone!!

The post You Are Done!! appeared first on Set-Rite Products.

]]> http://set-rite.com/you-are-done/feed/ 0 Slide from the Side! http://set-rite.com/slide-from-the-side/?utm_source=rss&utm_medium=rss&utm_campaign=slide-from-the-side http://set-rite.com/slide-from-the-side/#comments Sun, 25 Mar 2012 17:19:19 +0000 Tom Elliott http://set-rite.com/?p=5343 Slide each ‘half’ spacer underneath the toilet flange. Line up the holes of flange with the corresponding holes in spacer. Make sure the toilet hold-down bolt locations on the spacer line up with the ones on your flange.

The post Slide from the Side! appeared first on Set-Rite Products.

]]> Slide each ‘half’ spacer underneath the toilet flange. Line up the holes of flange with the corresponding holes in spacer. Make sure the toilet hold-down bolt locations on the spacer line up with the ones on your flange.

The post Slide from the Side! appeared first on Set-Rite Products.

]]> http://set-rite.com/slide-from-the-side/feed/ 0 The Install http://set-rite.com/the-install/?utm_source=rss&utm_medium=rss&utm_campaign=the-install http://set-rite.com/the-install/#comments Sun, 25 Mar 2012 17:14:56 +0000 Tom Elliott http://set-rite.com/?p=5340 After determining the spacer(s) needed to bring your existing toilet flange up to the finished floor height, just snap them in half and begin to position them under your flange.

The post The Install appeared first on Set-Rite Products.

]]> After determining the spacer(s) needed to bring your existing toilet flange up to the finished floor height, just snap them in half and begin to position them under your flange.

The post The Install appeared first on Set-Rite Products.

]]> http://set-rite.com/the-install/feed/ 0 Snap-in-Half Design http://set-rite.com/snap-in-half-design/?utm_source=rss&utm_medium=rss&utm_campaign=snap-in-half-design http://set-rite.com/snap-in-half-design/#comments Sun, 25 Mar 2012 17:09:35 +0000 Tom Elliott http://set-rite.com/?p=5337 Our spacers are designed to snap-in-half to use underneath an existing toilet flange.

The post Snap-in-Half Design appeared first on Set-Rite Products.

]]> Our spacers are designed to snap-in-half to use underneath an existing toilet flange.

The post Snap-in-Half Design appeared first on Set-Rite Products.

]]> http://set-rite.com/snap-in-half-design/feed/ 0 Existing Flange http://set-rite.com/existing-flange/?utm_source=rss&utm_medium=rss&utm_campaign=existing-flange http://set-rite.com/existing-flange/#comments Sun, 25 Mar 2012 17:06:17 +0000 Tom Elliott http://set-rite.com/?p=5333 Is your existing toilet flange sitting up after tearing out the old flooring during remodeling? Here is a way to fix that problem…

The post Existing Flange appeared first on Set-Rite Products.

]]> Is your existing toilet flange sitting up after tearing out the old flooring during remodeling? Here is a way to fix that problem…

The post Existing Flange appeared first on Set-Rite Products.

]]> http://set-rite.com/existing-flange/feed/ 0